POTHS – Stainless steel castor series

Stainless steel castors with soft thermoplastic polyurethane tread and heavy duty nylon wheel centre

POTHS stainless steel wheel and castor series

The tread of the POTHS series is made of a blue thermoplastic polyurethane (TPU) with a hardness of 80 Shore A. This is cast onto an impact-resistant nylon wheel centre. The tyre is non-marking and non-staining. It is also very gentle on the floor and quiet. The wheels in the POTHS series provide a very high level of operational comfort, alongside extremely low rolling and swivel resistance.

POTHS castors are completely corrosion-resistant and ideally suited for wet areas when combined with corrosion-resistant and vibration-ground finished chromium-nickel brackets, a corrosion-resistant roller or ball bearing and corrosion-resistant axle material.
The POTHS series is therefore the best solution when handling heavy loads in sensitive hygienic areas while reducing noise levels and providing exceptionally high operational comfort.

  • POTHS – Stainless steel swivel castors with plate
    POTHS stainless steel swivel castors with plate

    The POTHS wheel series is available with the following brackets with top plate fitting:

    LEX series: Stainless steel swivel bracket with top plate fitting
    LX series: Stainless steel swivel bracket with top plate fitting, medium duty design

    A detailed description of the bracket series and the different brake systems is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LEX-POTHS 100G 100 35 150 plain bore 125 100 x 85 80 x 60 9 36
    LX-POTHS 100G 100 35 200 plain bore 125 100 x 85 80 x 60 9 36
    LEX-POTHS 100XR 100 35 150 roller bearing 125 100 x 85 80 x 60 9 36
    LX-POTHS 100XR 100 35 200 roller bearing 125 100 x 85 80 x 60 9 36
    LEX-POTHS 100XKA 100 35 150 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LX-POTHS 100XKA 100 35 200 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LEX-POTHS 125G 125 40 150 plain bore 150 100 x 85 80 x 60 9 38
    LX-POTHS 125G 125 40 250 plain bore 150 100 x 85 80 x 60 9 38
    LEX-POTHS 125XR 125 40 150 roller bearing 150 100 x 85 80 x 60 9 38
    LX-POTHS 125XR 125 40 250 roller bearing 150 100 x 85 80 x 60 9 38
    LEX-POTHS 125XKA 125 40 150 ball bearing (C) 150 100 x 85 80 x 60 9 38
    LX-POTHS 125XKA 125 40 250 ball bearing (C) 150 100 x 85 80 x 60 9 38
    LEX-POTHS 160G 160 45 300 plain bore 195 140 x 110 105 x 75–80 11 54
    LX-POTHS 160G 160 45 400 plain bore 195 140 x 110 105 x 75–80 11 60
    LEX-POTHS 160XR 160 45 300 roller bearing 195 140 x 110 105 x 75–80 11 54
    LX-POTHS 160XR 160 45 400 roller bearing 195 140 x 110 105 x 75–80 11 60
    LEX-POTHS 160XK 160 45 300 ball bearing 195 140 x 110 105 x 75–80 11 54
    LX-POTHS 160XK 160 45 400 ball bearing 195 140 x 110 105 x 75–80 11 60
    LEX-POTHS 200G 200 50 300 plain bore 235 140 x 110 105 x 75–80 11 54
    LX-POTHS 200G 200 50 400 plain bore 235 140 x 110 105 x 75–80 11 61
    LEX-POTHS 200XR 200 50 300 roller bearing 235 140 x 110 105 x 75–80 11 54
    LX-POTHS 200XR 200 50 400 roller bearing 235 140 x 110 105 x 75–80 11 61
    LEX-POTHS 200XK 200 50 300 ball bearing 235 140 x 110 105 x 75–80 11 54
    LX-POTHS 200XK 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11 61
    To the product finder
  • POTHS – Stainless steel swivel castors with bolt hole
    POTHS stainless steel swivel castors with bolt hole

    The POTHS series is available with the following swivel bracket series with a bolt hole fitting:

    LEXR series: Stainless steel swivel bracket with bolt hole

    A detailed description of the LEXR bracket series is available in the guide. The brake systems available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LEXR-POTHS 100G 100 35 150 plain bore 125 70 13 36
    LEXR-POTHS 100XR 100 35 150 roller bearing 125 70 13 36
    LEXR-POTHS 100XKA 100 35 150 ball bearing (C) 125 70 13 36
    LEXR-POTHS 125G 125 40 150 plain bore 150 70 13 38
    LEXR-POTHS 125XR 125 40 150 roller bearing 150 70 13 38
    LEXR-POTHS 125XKA 125 40 150 ball bearing (C) 150 70 13 38
    LEXR-POTHS 160G 160 45 300 plain bore 195 88 13 54
    LEXR-POTHS 160XR 160 45 300 roller bearing 195 88 13 54
    LEXR-POTHS 160XK 160 45 300 ball bearing 195 88 13 54
    LEXR-POTHS 200G 200 50 300 plain bore 235 88 13 54
    LEXR-POTHS 200XR 200 50 300 roller bearing 235 88 13 54
    LEXR-POTHS 200XK 200 50 300 ball bearing 235 88 13 54
    To the product finder
  • POTHS – Stainless steel swivel castors with stem
    POTHS stainless steel swivel castors with stem

    The POTHS series is also available for the following bracket series with a stem fitting as an alternative to a plate and bolt hole fitting.

    LEXZ series: Stainless steel swivel bracket with stem

    The properties of this bracket series are described in the guide. The brake systems which are available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Stem Ø

    [mm]    		 Stem length

    [mm]    		 Offset

    [mm]
    LEXZ-POTHS 100G 100 35 150 plain bore 125 20 50 36
    LEXZ-POTHS 100XR 100 35 150 roller bearing 125 20 50 36
    LEXZ-POTHS 100XKA 100 35 150 ball bearing (C) 125 20 50 36
    LEXZ-POTHS 125G 125 40 150 plain bore 150 20 50 38
    LEXZ-POTHS 125XR 125 40 150 roller bearing 150 20 50 38
    LEXZ-POTHS 125XKA 125 40 150 ball bearing (C) 150 20 50 38
    LEXZ-POTHS 160G 160 45 300 plain bore 195 27 60 54
    LEXZ-POTHS 160XR 160 45 300 roller bearing 195 27 60 54
    LEXZ-POTHS 160XK 160 45 300 ball bearing 195 27 60 54
    LEXZ-POTHS 200G 200 50 300 plain bore 235 27 60 54
    LEXZ-POTHS 200XR 200 50 300 roller bearing 235 27 60 54
    LEXZ-POTHS 200XK 200 50 300 ball bearing 235 27 60 54
    To the product finder
  • POTHS – Stainless steel fixed castors
    POTHS stainless steel fixed castors

    The POTHS series provides matching fixed castors for all of the swivel castor series as part of the standard range:

    BX series: Stainless steel fixed bracket with top plate fitting

    A detailed description of the BX bracket series is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    BX-POTHS 100G 100 35 200 plain bore 125 100 x 85 80 x 60 9
    BX-POTHS 100XR 100 35 200 roller bearing 125 100 x 85 80 x 60 9
    BX-POTHS 100XKA 100 35 200 ball bearing (C) 125 100 x 85 80 x 60 9
    BX-POTHS 125G 125 40 250 plain bore 150 100 x 85 80 x 60 9
    BX-POTHS 125XR 125 40 250 roller bearing 150 100 x 85 80 x 60 9
    BX-POTHS 125XKA 125 40 250 ball bearing (C) 150 100 x 85 80 x 60 9
    BX-POTHS 160G 160 45 400 plain bore 195 140 x 110 105 x 75–80 11
    BX-POTHS 160XR 160 45 400 roller bearing 195 140 x 110 105 x 75–80 11
    BX-POTHS 160XK 160 45 400 ball bearing 195 140 x 110 105 x 75–80 11
    BX-POTHS 200G 200 50 400 plain bore 235 140 x 110 105 x 75–80 11
    BX-POTHS 200XR 200 50 400 roller bearing 235 140 x 110 105 x 75–80 11
    BX-POTHS 200XK 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11
    To the product finder