GST – Wheel and castor series

Heavy duty wheels and castors with Blickle Softhane® polyurethane tread and cast iron wheel centre

GST wheel and castor series with Blickle Softhane polyurethane tread

The tread of the heavy duty wheels and castors in the GST series is made using the high-quality polyurethane-elastomer Blickle Softhane®. This is cast onto a wheel centre made of rugged grey cast iron. The extra-thick tread with a hardness of 75 Shore A provides good floor surface preservation and smooth rolling performance.

The wheels of the GST series are primarily used in intralogistics when transporting heavy loads on uneven surfaces.

  • GST – Wheels
    GST wheels with Blickle Softhane polyurethane tread

    The GST series has diameters ranging between 125 and 400 mm as standard and are available with a ball bearing. An antistatic version with a grey tread is also available. The wheels are also available as a drive wheel GSTN (series) or a hub fitting wheel GSTA (series) .


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Load capacity
    at 10 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    GST 127/20K 125 50 450 180 ball bearing 20 60
    GST 150/20K 150 50 570 220 ball bearing 20 60
    GST 160/20K 160 50 600 240 ball bearing 20 60
    GST 200/20K 200 50 800 320 ball bearing 20 60
    GST 200/25K 200 50 800 320 ball bearing 25 60
    GST 202/25K 200 80 1,200 480 ball bearing 25 90
    GST 202/35K 200 80 1,200 480 ball bearing 35 90
    GST 250/25K 250 60 1,200 480 ball bearing 25 70
    GST 250/35K 250 60 1,200 480 ball bearing 35 70
    GST 252/25K 250 80 1,400 560 ball bearing 25 90
    GST 252/30K 250 80 1,400 560 ball bearing 30 90
    GST 302/30K 300 80 1,800 680 ball bearing 30 90
    GST 302/35K 300 80 1,800 680 ball bearing 35 90
    GST 304/35K 300 100 2,250 840 ball bearing 35 120
    GST 404/40K 400 100 3,000 1,100 ball bearing 40 120
    To the product finder
  • GST – Swivel castors with plate
    GST swivel castors with plate

    The wheels in the GST series are available in combination with various Blickle bracket series with a top plate fitting. These bracket series range from medium duty pressed steel swivel brackets through to heavy duty swivel brackets in welded steel:

    LH series: Pressed steel swivel bracket with top plate fitting, heavy duty design
    LUH series: Pressed steel swivel bracket with top plate fitting, heavy duty enclosed design
    LO series: Heavy duty welded steel swivel bracket with top plate fitting
    LS series: Heavy-duty welded steel swivel bracket, heavy-duty swivel head

    The guide provides a detailed comparison of the bracket series which are available. The brake system versions available for each base product are covered in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LH-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11 55
    LO-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11 50
    LS-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11 50
    LUH-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11 55
    LH-GST 150K 150 50 570 ball bearing 197 140 x 110 105 x 75–80 11 65
    LO-GST 150K 150 50 570 ball bearing 200 140 x 110 105 x 75–80 11 55
    LS-GST 150K 150 50 570 ball bearing 200 140 x 110 105 x 75–80 11 55
    LUH-GST 150K 150 50 570 ball bearing 197 140 x 110 105 x 75–80 11 61
    LH-GST 160K 160 50 600 ball bearing 202 140 x 110 105 x 75–80 11 65
    LO-GST 160K 160 50 600 ball bearing 205 140 x 110 105 x 75–80 11 55
    LS-GST 160K 160 50 600 ball bearing 205 140 x 110 105 x 75–80 11 55
    LUH-GST 160K 160 50 600 ball bearing 202 140 x 110 105 x 75–80 11 61
    LH-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11 70
    LO-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11 60
    LS-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11 60
    LUH-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11 63
    LH-GST 202K 200 80 800 ball bearing 245 140 x 110 105 x 75–80 11 70
    LO-GST 202K 200 80 1,100 ball bearing 245 140 x 110 105 x 75–80 11 65
    LS-GST 202K 200 80 1,200 ball bearing 255 175 x 140 140 x 105 14 65
    LH-GST 250K 250 60 900 ball bearing 295 140 x 110 105 x 75–80 11 82
    LO-GST 250K 250 60 1,200 ball bearing 295 140 x 110 105 x 75–80 11 70
    LS-GST 250K 250 60 1,200 ball bearing 305 175 x 140 140 x 105 14 75
    LS-GST 252K 250 80 1,400 ball bearing 305 175 x 140 140 x 105 14 75
    LS-GST 302K 300 80 1,800 ball bearing 355 175 x 140 140 x 105 14 85
    LS-GST 304K 300 100 2,250 ball bearing 370 200 x 160 160 x 120 14 85
    To the product finder
  • GST – Fixed castors
    GST fixed castors

    The GST wheel series can be combined with the following fixed brackets:

    BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design
    BO series: Heavy duty welded steel fixed bracket with top plate fitting
    BS series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

    A detailed description of the differences between the bracket series is provided in the guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    BH-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11
    BO-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11
    BS-GST 127K 125 50 450 ball bearing 170 140 x 110 105 x 75–80 11
    BH-GST 150K 150 50 570 ball bearing 197 140 x 110 105 x 75–80 11
    BO-GST 150K 150 50 570 ball bearing 200 140 x 110 105 x 75–80 11
    BS-GST 150K 150 50 570 ball bearing 200 140 x 110 105 x 75–80 11
    BH-GST 160K 160 50 600 ball bearing 202 140 x 110 105 x 75–80 11
    BO-GST 160K 160 50 600 ball bearing 205 140 x 110 105 x 75–80 11
    BS-GST 160K 160 50 600 ball bearing 205 140 x 110 105 x 75–80 11
    BH-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11
    BO-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11
    BS-GST 200K 200 50 800 ball bearing 245 140 x 110 105 x 75–80 11
    BO-GST 202K 200 80 1,250 ball bearing 245 140 x 110 105 x 75–80 11
    BS-GST 202K 200 80 1,200 ball bearing 255 175 x 140 140 x 105 14
    BH-GST 250K 250 60 900 ball bearing 295 140 x 110 105 x 75–80 11
    BO-GST 250K 250 60 1,200 ball bearing 295 140 x 110 105 x 75–80 11
    BS-GST 250K 250 60 1,200 ball bearing 305 175 x 140 140 x 105 14
    BS-GST 252K 250 80 1,400 ball bearing 305 175 x 140 140 x 105 14
    BS-GST 302K 300 80 1,800 ball bearing 355 175 x 140 140 x 105 14
    BS-GST 304K 300 100 2,250 ball bearing 370 200 x 160 160 x 120 14
    To the product finder
  • GST – Twin castors
    GST twin castors

    The wheels in the GST series are available as twin castors in combination with the welded steel LSD and BSD bracket series:

    LSD series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head
    BSD series: Heavy duty welded steel fixed bracket with top plate fitting, heavy duty design

    The specific features of each bracket series are covered in detail in the guide. The brake system versions available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Number of
    wheels

    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    BSD-GST 127K 125 50 2 900 ball bearing 185 175 x 140 140 x 105 14
    LSD-GST 127K 125 50 2 900 ball bearing 185 175 x 140 140 x 105 14 50
    BSD-GST 150K-35 150 50 2 1,100 ball bearing 215 175 x 140 140 x 105 14
    LSD-GST 150K-35 150 50 2 1,100 ball bearing 215 175 x 140 140 x 105 14 55
    BSD-GST 200K-35 200 50 2 1,600 ball bearing 260 175 x 140 140 x 105 14
    LSD-GST 200K-35 200 50 2 1,600 ball bearing 260 175 x 140 140 x 105 14 60
    BSD-GST 202K 200 80 2 2,400 ball bearing 280 255 x 200 210 x 160 18
    LSD-GST 202K 200 80 2 2,400 ball bearing 280 255 x 200 210 x 160 18 60
    BSD-GST 250K 250 60 2 2,400 ball bearing 330 255 x 200 210 x 160 18
    LSD-GST 250K 250 60 2 2,400 ball bearing 330 255 x 200 210 x 160 18 70
    BSD-GST 252K 250 80 2 2,800 ball bearing 330 255 x 200 210 x 160 18
    LSD-GST 252K 250 80 2 2,800 ball bearing 330 255 x 200 210 x 160 18 70
    BSD-GST 302K 300 80 2 3,600 ball bearing 390 255 x 200 210 x 160 18
    LSD-GST 302K 300 80 2 3,600 ball bearing 390 255 x 200 210 x 160 18 80
    BSD-GST 304K 300 100 2 4,500 ball bearing 390 300 x 200 210 x 160 18
    LSD-GST 304K 300 100 2 4,500 ball bearing 390 255 x 200 210 x 160 18 80
    BSD-GST 404K-42 400 100 2 6,000 ball bearing 530 400 x 300 340 x 240 26
    LSD-GST 404K-42 400 100 2 6,000 ball bearing 530 400 x 300 340 x 240 26 125
    To the product finder