PP – Wheel and castor series

Polypropylene wheels and castors in black

PP polypropylene wheel and castor series

The wheels in the PP series are made from high-quality injection-moulded polypropylene. The wheels are highly resistant to a wide range of aggressive substances. With a hardness of 60 Shore D, the wheels offer a particularly low level of rolling resistance.

The wheels and castors in the PP series are primarily used for industrial and commercial applications. Many lightweight transport carts, retail shelving units and display stands are fitted with black polypropylene wheels and castors.

  • PP – Wheels
    PP polypropylene wheels

    The wheels in the PP series come in sizes ranging between 60 and 200 mm in diameter as standard. They are also available with a ball bearing, roller bearing or plain bore. The PP…-EL series is suitable for applications where electrically conductive wheels are required. The wheels are also available in natural white PPN series.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    PP 60/12G 60 29 80 plain bore 12 35
    PP 80/12G 80 32 120 plain bore 12 35
    PP 80/12R 80 32 120 roller bearing 12 35
    PP 100/12G 100 37 160 plain bore 12 45
    PP 100/12R 100 37 160 roller bearing 12 45
    PP 100/8KA 100 37 160 ball bearing (C) 8 46
    PP 125/12G 125 40 200 plain bore 12 45
    PP 125/12R 125 40 200 roller bearing 12 45
    PP 125/8KA 125 40 200 ball bearing (C) 8 46
    PP 150/20G 150 50 300 plain bore 20 60
    PP 150/20R 150 50 300 roller bearing 20 60
    PP 150/20K 150 50 300 ball bearing 20 60
    PP 200/20G 200 50 450 plain bore 20 60
    PP 200/20R 200 50 450 roller bearing 20 60
    PP 200/20K 200 50 450 ball bearing 20 60
    To the product finder
  • PP – Swivel castors with plate
    PP polypropylene swivel castors with plate

    As standard, the PP wheel series is available with two bracket series with a top plate fitting. These vary in terms of their design and load capacity:

    LE series: Pressed steel swivel bracket with top plate fitting
    L series: Pressed steel swivel bracket with top plate fitting, medium duty design

    A detailed description of the bracket series and the matching brake systems is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LE-PP 60G 60 29 80 plain bore 80 100 x 85 80 x 60 9 35
    LE-PP 80G 80 32 120 plain bore 102 100 x 85 80 x 60 9 38
    L-PP 80G 80 32 120 plain bore 102 100 x 85 80 x 60 9 38
    LE-PP 80R 80 32 120 roller bearing 102 100 x 85 80 x 60 9 38
    L-PP 80R 80 32 120 roller bearing 102 100 x 85 80 x 60 9 38
    LE-PP 100G 100 37 150 plain bore 125 100 x 85 80 x 60 9 36
    L-PP 100G 100 37 160 plain bore 125 100 x 85 80 x 60 9 36
    LE-PP 100R 100 37 150 roller bearing 125 100 x 85 80 x 60 9 36
    L-PP 100R 100 37 160 roller bearing 125 100 x 85 80 x 60 9 36
    LE-PP 100KA 100 37 150 ball bearing (C) 125 100 x 85 80 x 60 9 36
    L-PP 100KA 100 37 160 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LE-PP 125G 125 40 150 plain bore 150 100 x 85 80 x 60 9 38
    L-PP 125G 125 40 200 plain bore 150 100 x 85 80 x 60 9 38
    LE-PP 125R 125 40 150 roller bearing 150 100 x 85 80 x 60 9 38
    L-PP 125R 125 40 200 roller bearing 150 100 x 85 80 x 60 9 38
    LE-PP 125KA 125 40 150 ball bearing (C) 150 100 x 85 80 x 60 9 38
    L-PP 125KA 125 40 200 ball bearing (C) 150 100 x 85 80 x 60 9 38
    LE-PP 150G 150 50 300 plain bore 190 140 x 110 105 x 75–80 11 54
    L-PP 150G 150 50 300 plain bore 190 140 x 110 105 x 75–80 11 60
    LE-PP 150R 150 50 300 roller bearing 190 140 x 110 105 x 75–80 11 54
    L-PP 150R 150 50 300 roller bearing 190 140 x 110 105 x 75–80 11 60
    LE-PP 150K 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11 54
    L-PP 150K 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11 60
    LE-PP 200G 200 50 300 plain bore 235 140 x 110 105 x 75–80 11 54
    L-PP 200G 200 50 400 plain bore 235 140 x 110 105 x 75–80 11 65
    LE-PP 200R 200 50 300 roller bearing 235 140 x 110 105 x 75–80 11 54
    L-PP 200R 200 50 400 roller bearing 235 140 x 110 105 x 75–80 11 65
    LE-PP 200K 200 50 300 ball bearing 235 140 x 110 105 x 75–80 11 54
    L-PP 200K 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11 65
    To the product finder
  • PP – Swivel castors with bolt hole
    PP polypropylene swivel castors with bolt hole

    In addition to the castors with top plate fitting, the PP series is also available with a bolt hole fitting.

    LER series: Pressed steel swivel bracket with bolt hole

    Refer to the guide for more information about the LER series. The brake system versions available for each base product are covered in greater detail in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LER-PP 60G 60 29 80 plain bore 80 70 13 35
    LER-PP 80G 80 32 120 plain bore 102 70 13 38
    LER-PP 80R 80 32 120 roller bearing 102 70 13 38
    LER-PP 100G 100 37 150 plain bore 125 70 13 36
    LER-PP 100R 100 37 150 roller bearing 125 70 13 36
    LER-PP 100KA 100 37 150 ball bearing (C) 125 70 13 36
    LER-PP 125G 125 40 150 plain bore 150 70 13 38
    LER-PP 125R 125 40 150 roller bearing 150 70 13 38
    LER-PP 125KA 125 40 150 ball bearing (C) 150 70 13 38
    LER-PP 150G 150 50 300 plain bore 190 88 13 54
    LER-PP 150R 150 50 300 roller bearing 190 88 13 54
    LER-PP 150K 150 50 300 ball bearing 190 88 13 54
    LER-PP 200G 200 50 300 plain bore 235 88 13 54
    LER-PP 200R 200 50 300 roller bearing 235 88 13 54
    LER-PP 200K 200 50 300 ball bearing 235 88 13 54
    To the product finder
  • PP – Fixed castors
    PP polypropylene fixed castors

    Blickle also provides suitable castors with fixed brackets for all of the swivel castor series.

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design

    Detailed information about the fixed bracket is available in the guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    B-PP 60G 60 29 80 plain bore 80 100 x 85 80 x 60 9
    B-PP 80G 80 32 120 plain bore 102 100 x 85 80 x 60 9
    B-PP 80R 80 32 120 roller bearing 102 100 x 85 80 x 60 9
    B-PP 100G 100 37 160 plain bore 125 100 x 85 80 x 60 9
    B-PP 100R 100 37 160 roller bearing 125 100 x 85 80 x 60 9
    B-PP 100KA 100 37 160 ball bearing (C) 125 100 x 85 80 x 60 9
    B-PP 125G 125 40 200 plain bore 150 100 x 85 80 x 60 9
    B-PP 125R 125 40 200 roller bearing 150 100 x 85 80 x 60 9
    B-PP 125KA 125 40 200 ball bearing (C) 150 100 x 85 80 x 60 9
    B-PP 150G 150 50 300 plain bore 190 140 x 110 105 x 75–80 11
    B-PP 150R 150 50 300 roller bearing 190 140 x 110 105 x 75–80 11
    B-PP 150K 150 50 300 ball bearing 190 140 x 110 105 x 75–80 11
    B-PP 200G 200 50 400 plain bore 235 140 x 110 105 x 75–80 11
    B-PP 200R 200 50 400 roller bearing 235 140 x 110 105 x 75–80 11
    B-PP 200K 200 50 400 ball bearing 235 140 x 110 105 x 75–80 11
    To the product finder