VPA – Wheel and castor series

Light duty wheels and castors with solid rubber tyre and synthetic rim

VPA light duty wheel and castor series

The VPA series use a high-quality solid rubber tyre with a hardness of 80 Shore A, cast onto a nylon rim. The tyre is also non-marking grey and non-staining. The series is characterised by low rolling and swivel resistance. The rim of the electrically conductive version is made from polypropylene instead of nylon.

 

The VPA series is frequently used for furniture and sports equipment. They are also used for retail facilities and measurement and testing equipment.

  • VPA – Swivel castors with bolt hole
    VPA Swivel castors with bolt hole

    The wheels in the VPA series are available as castors with a bolt hole in addition to other fitting types:

    LRA/LKRA series: Light duty swivel bracket with bolt hole

    A detailed description of the bracket series is available in our guide. More information about the brake systems available for each base product is listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LRA-VPA 50G 50 18 40 plain bore 69 43 11 23
    LRA-VPA 50K 50 18 40 ball bearing 69 43 11 23
    LRA-VPA 75G 75 25 60 plain bore 98 43 11 29
    LRA-VPA 75K 75 25 60 ball bearing 98 43 11 29
    LKRA-VPA 80G 80 25 80 plain bore 108 57 13 40
    LKRA-VPA 80G-11 80 25 80 plain bore 108 57 11 40
    LKRA-VPA 80K 80 25 80 ball bearing 108 57 13 40
    LKRA-VPA 80K-11 80 25 80 ball bearing 108 57 11 40
    LRA-VPA 100G 100 25 70 plain bore 121 43 11 33
    LRA-VPA 100K 100 25 70 ball bearing 121 43 11 33
    LKRA-VPA 101G 100 32 110 plain bore 133 57 13 40
    LKRA-VPA 101G-11 100 32 110 plain bore 133 57 11 40
    LKRA-VPA 101K 100 32 110 ball bearing 133 57 13 40
    LKRA-VPA 101K-11 100 32 110 ball bearing 133 57 11 40
    LKRA-VPA 125G 125 25 100 plain bore 158 57 13 40
    LKRA-VPA 125G-11 125 25 100 plain bore 158 57 11 40
    LKRA-VPA 125K 125 25 100 ball bearing 158 57 13 40
    LKRA-VPA 125K-11 125 25 100 ball bearing 158 57 11 40
    LKRA-VPA 126G 125 32 120 plain bore 158 57 13 40
    LKRA-VPA 126G-11 125 32 120 plain bore 158 57 11 40
    LKRA-VPA 126K 125 32 120 ball bearing 158 57 13 40
    LKRA-VPA 126K-11 125 32 120 ball bearing 158 57 11 40
    LKRA-VPA 150G 150 30 110 plain bore 182 57 13 40
    LKRA-VPA 150G-11 150 30 110 plain bore 182 57 11 40
    LKRA-VPA 150K 150 30 110 ball bearing 182 57 13 40
    LKRA-VPA 150K-11 150 30 110 ball bearing 182 57 11 40
    To the product finder
  • VPA – Swivel castors with threaded pin
    VPA Swivel castors with threaded pin

    One type of bracket available for wheels in the VPA series is a swivel bracket with a threaded pin fitting:

    LRA/LKRA series: Light duty swivel bracket with threaded pin

    A detailed description of the LRA and LKRA bracket series is available in our guide. The brake system versions for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Thread


    		 Pin length

    [mm]    		 Offset

    [mm]
    LRA-VPA 50G-GS10 50 18 40 plain bore 69 M10 30 23
    LRA-VPA 50K-GS10 50 18 40 ball bearing 69 M10 30 23
    LRA-VPA 75G-GS10 75 25 60 plain bore 98 M10 30 29
    LRA-VPA 75K-GS10 75 25 60 ball bearing 98 M10 30 29
    LKRA-VPA 80G-GS12 80 25 80 plain bore 108 M12 30 40
    LKRA-VPA 80K-GS12 80 25 80 ball bearing 108 M12 30 40
    LRA-VPA 100G-GS10 100 25 70 plain bore 121 M10 30 33
    LRA-VPA 100K-GS10 100 25 70 ball bearing 121 M10 30 33
    LKRA-VPA 101G-GS12 100 32 110 plain bore 133 M12 30 40
    LKRA-VPA 101K-GS12 100 32 110 ball bearing 133 M12 30 40
    LKRA-VPA 125G-GS12 125 25 100 plain bore 158 M12 30 40
    LKRA-VPA 125K-GS12 125 25 100 ball bearing 158 M12 30 40
    LKRA-VPA 126G-GS12 125 32 120 plain bore 158 M12 30 40
    LKRA-VPA 126K-GS12 125 32 120 ball bearing 158 M12 30 40
    LKRA-VPA 150G-GS12 150 30 110 plain bore 182 M12 30 40
    LKRA-VPA 150K-GS12 150 30 110 ball bearing 182 M12 30 40
    To the product finder
  • VPA – Swivel castors with plug-in pin
    VPA Swivel castors with plug-in pin

    The VPA series is available with the following bracket series with a plug-in pin fitting type:

    LRA series: Light duty swivel bracket with plug-in pin

    Refer to our guide for more information about this bracket series. The brake systems available for each base product are provided in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Pin Ø

    [mm]    		 Pin length

    [mm]    		 Offset

    [mm]
    LRA-VPA 50G-ES 50 18 40 plain bore 69 11 30.5 23
    LRA-VPA 50K-ES 50 18 40 ball bearing 69 11 30.5 23
    LRA-VPA 75G-ES 75 25 60 plain bore 98 11 30.5 29
    LRA-VPA 75K-ES 75 25 60 ball bearing 98 11 30.5 29
    LRA-VPA 100G-ES 100 25 70 plain bore 121 11 30.5 33
    LRA-VPA 100K-ES 100 25 70 ball bearing 121 11 30.5 33
    To the product finder
  • VPA – Fixed castors
    VPA Fixed castors

    VPA wheels are provided with a fixed bracket from the following series as standard:

    BPA/BKPA series: Light duty fixed bracket with top plate fitting
    BRA/BKRA series: Light duty fixed bracket with bolt hole

    The characteristics of the different bracket series are covered in detail in the guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]
    BPA-VPA 50G 50 18 40 plain bore 71 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 50G 50 18 40 plain bore 69 43 11
    BPA-VPA 50K 50 18 40 ball bearing 71 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 50K 50 18 40 ball bearing 69 43 11
    BPA-VPA 75G 75 25 60 plain bore 100 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 75G 75 25 60 plain bore 98 43 11
    BPA-VPA 75K 75 25 60 ball bearing 100 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 75K 75 25 60 ball bearing 98 43 11
    BKPA-VPA 80G 80 25 80 plain bore 111 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 80G 80 25 80 plain bore 108 57 13
    BKPA-VPA 80K 80 25 80 ball bearing 111 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 80K 80 25 80 ball bearing 108 57 13
    BKPA-VPA 101G 100 32 110 plain bore 136 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 101G 100 32 110 plain bore 133 57 13
    BKPA-VPA 101K 100 32 110 ball bearing 136 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 101K 100 32 110 ball bearing 133 57 13
    BKPA-VPA 125G 125 25 100 plain bore 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 125G 125 25 100 plain bore 158 57 13
    BKPA-VPA 125K 125 25 100 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 125K 125 25 100 ball bearing 158 57 13
    BKPA-VPA 126G 125 32 120 plain bore 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 126G 125 32 120 plain bore 158 57 13
    BKPA-VPA 126K 125 32 120 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 126K 125 32 120 ball bearing 158 57 13
    BKPA-VPA 150G 150 30 110 plain bore 185 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 150G 150 30 110 plain bore 182 57 13
    BKPA-VPA 150K 150 30 110 ball bearing 185 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 150K 150 30 110 ball bearing 182 57 13
    To the product finder
  • VPA – Twin castors
    VPA Twin castors

    The wheels in the VPA series can be combined with the following bracket series to create twin castors:

    LDA series: Light duty twin wheel swivel bracket with top plate fitting
    LMDA series: Light duty twin wheel swivel bracket with bolt hole

    A detailed description and a comparison of the bracket series are available in our guide. The suitable brake systems for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Number of
    wheels

    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LDA-VPA 50G 50 18 2 80 plain bore 71 60 x 60 38 x 38 / 48 x 48 6.2 31
    LMDA-VPA 50G 50 18 2 80 plain bore 71 41 10,2 31
    LDA-VPA 50K 50 18 2 80 ball bearing 71 60 x 60 38 x 38 / 48 x 48 6.2 31
    LMDA-VPA 50K 50 18 2 80 ball bearing 71 41 10,2 31
    LDA-VPA 75G 75 25 2 100 plain bore 101 60 x 60 40 x 40 / 46 x 46 6.2 34
    LMDA-VPA 75G 75 25 2 100 plain bore 98 55 10,2 34
    LDA-VPA 75K 75 25 2 100 ball bearing 101 60 x 60 40 x 40 / 46 x 46 6.2 34
    LMDA-VPA 75K 75 25 2 100 ball bearing 98 55 10,2 34
    To the product finder