VPA…-EL – Wheel and castor series

Electrically conductive wheels and castors with solid rubber tyre and synthetic rim

VPA electrically conductive wheels and castors series

The wheels in the VPA series use a tyre made of high-quality solid rubber with a hardness of 80° Shore A, cast onto a polypropylene rim. The VPA series is characterised by low rolling and swivel resistance. The electrically conductive rim and tread give these wheels a maximum resistance of 104 ohms.

The castors in the VPA…-EL series are frequently used for measuring and testing equipment or devices used in the pharmaceutical sector.

  • VPA…-EL – Wheels
    VPA electrically conductive wheels

    The standard wheel sizes in the VPA…-EL series range between 50 and 150 mm. A ball bearing is used as standard.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    VPA 50/6K-EL 50 18 30 ball bearing 6 22.5
    VPA 75/6K-EL 75 25 45 ball bearing 6 30
    VPA 80/8K-EL 80 25 60 ball bearing 8 35
    VPA 100/6K-EL 100 25 70 ball bearing 6 30
    VPA 101/8K-EL 100 32 80 ball bearing 8 35
    VPA 125/8K-EL 125 25 75 ball bearing 8 35
    VPA 126/8K-EL 125 32 95 ball bearing 8 35
    VPA 150/8K-EL 150 30 100 ball bearing 8 35
    To the product finder
  • VPA…-EL – Swivel castors with plate
    VPA electrically conductive swivel castors with plate

    As standard, the VPA…-EL series is available with the following bracket series with top plate fitting:

    LPA/LKPA series: Light duty swivel bracket with top plate fitting

    A detailed description of this bracket series is available in the guide. Suitable brake systems for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LPA-VPA 50K-EL 50 18 30 ball bearing 71 60 x 60 38 x 38 / 48 x 48 6.2 23
    LPA-VPA 75K-EL 75 25 45 ball bearing 100 60 x 60 38 x 38 / 48 x 48 6.2 29
    LKPA-VPA 80K-EL 80 25 60 ball bearing 111 90 x 66 75 x 45 / 61 x 51 8.5 40
    LPA-VPA 100K-EL 100 25 70 ball bearing 123 60 x 60 38 x 38 / 48 x 48 6.2 33
    LKPA-VPA 101K-EL 100 32 80 ball bearing 136 90 x 66 75 x 45 / 61 x 51 8.5 40
    LKPA-VPA 125K-EL 125 25 75 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5 40
    LKPA-VPA 126K-EL 125 32 95 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5 40
    LKPA-VPA 150K-EL 150 30 100 ball bearing 185 90 x 66 75 x 45 / 61 x 51 8.5 40
    To the product finder
  • VPA…-EL – Swivel castors with bolt hole
    VPA electrically conductive swivel castors with bolt hole

    As standard, wheels in the VPA…-EL series are available with the following bracket series with bolt hole fitting:

    LRA/LKRA series: Light duty swivel bracket with bolt hole

    A detailed description of the LRA/LKRA bracket is available in the guide. More information about the brake system versions available for each base product is listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LRA-VPA 50K-EL 50 18 30 ball bearing 69 43 11 23
    LRA-VPA 75K-EL 75 25 45 ball bearing 98 43 11 29
    LKRA-VPA 80K-11-EL 80 25 60 ball bearing 108 57 11 40
    LKRA-VPA 80K-EL 80 25 60 ball bearing 108 57 13 40
    LRA-VPA 100K-EL 100 25 70 ball bearing 121 43 11 33
    LKRA-VPA 101K-11-EL 100 32 80 ball bearing 133 57 11 40
    LKRA-VPA 101K-EL 100 32 80 ball bearing 133 57 13 40
    LKRA-VPA 125K-11-EL 125 25 75 ball bearing 158 57 11 40
    LKRA-VPA 125K-EL 125 25 75 ball bearing 158 57 13 40
    LKRA-VPA 126K-11-EL 125 32 95 ball bearing 158 57 11 40
    LKRA-VPA 126K-EL 125 32 95 ball bearing 158 57 13 40
    LKRA-VPA 150K-11-EL 150 30 100 ball bearing 182 57 11 40
    LKRA-VPA 150K-EL 150 30 100 ball bearing 182 57 13 40
    To the product finder
  • VPA…-EL – Swivel castors with plug-in pin
    VPA electrically conductive swivel castors with plug-in-pin

    The VPA series is available with the following bracket series with a plug-in pin fitting type:

    LRA series: Light duty swivel bracket with plug-in pin

    Refer to our guide for more information about this bracket series. The brake systems available for each base product are provided in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Pin Ø

    [mm]    		 Pin length

    [mm]    		 Offset

    [mm]
    LRA-VPA 50K-EL-ES 50 18 30 ball bearing 69 11 30.5 23
    LRA-VPA 75K-EL-ES 75 25 45 ball bearing 98 11 30.5 29
    LRA-VPA 100K-EL-ES 100 25 70 ball bearing 121 11 30.5 33
    To the product finder
  • VPA…-EL – Swivel castors with threaded pin
    VPA electrically conductive swivel castor with threaded pin

    One type of bracket available for wheels in the VPA series is the following swivel bracket series which uses a threaded pin fitting:

    LRA/LKRA series: Light duty swivel bracket with threaded pin

    A detailed description of the LRA and LKRA bracket series is available in our guide. More information about the brake system versions for each base product is listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Thread


    		 Pin length

    [mm]    		 Offset

    [mm]
    LRA-VPA 50K-EL-GS10 50 18 30 ball bearing 69 M10 30 23
    LRA-VPA 75K-EL-GS10 75 25 45 ball bearing 98 M10 30 29
    LKRA-VPA 80K-EL-GS12 80 25 60 ball bearing 108 M12 30 40
    LRA-VPA 100K-EL-GS10 100 25 70 ball bearing 121 M10 30 33
    LKRA-VPA 101K-EL-GS12 100 32 80 ball bearing 133 M12 30 40
    LKRA-VPA 125K-EL-GS12 125 25 75 ball bearing 158 M12 30 40
    LKRA-VPA 126K-EL-GS12 125 32 95 ball bearing 158 M12 30 40
    LKRA-VPA 150K-EL-GS12 150 30 100 ball bearing 182 M12 30 40
    To the product finder
  • VPA…-EL – Fixed castors
    VPA eletrically conductive fixed castors

    Blickle also provides suitable castors with fixed brackets for all of the swivel castor series.

    BPA/BKPA series: Light duty fixed bracket with top plate fitting
    BRA/BKRA series: Light duty fixed bracket with bolt hole

    The properties of each individual fixed castor series are listed in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]
    BPA-VPA 50K-EL 50 18 30 ball bearing 71 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 50K-EL 50 18 30 ball bearing 69 43 11
    BPA-VPA 75K-EL 75 25 45 ball bearing 100 60 x 60 38 x 38 / 48 x 48 6.2
    BRA-VPA 75K-EL 75 25 45 ball bearing 98 43 11
    BKPA-VPA 80K-EL 80 25 60 ball bearing 111 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 80K-EL 80 25 60 ball bearing 108 57 13
    BKPA-VPA 101K-EL 100 32 80 ball bearing 136 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 101K-EL 100 32 80 ball bearing 133 57 13
    BKPA-VPA 125K-EL 125 25 75 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 125K-EL 125 25 75 ball bearing 158 57 13
    BKPA-VPA 126K-EL 125 32 95 ball bearing 161 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 126K-EL 125 32 95 ball bearing 158 57 13
    BKPA-VPA 150K-EL 150 30 100 ball bearing 185 90 x 66 75 x 45 / 61 x 51 8.5
    BKRA-VPA 150K-EL 150 30 100 ball bearing 182 57 13
    To the product finder
  • VPA…-EL – Twin castors
    VPA electrically conductive twin castors

    In addition to swivel and fixed castors, VPA...-EL wheels can also be provided as twin castors when combined with suitable brackets:

    LDA series: Light duty twin wheel swivel bracket with top plate fitting
    LMDA series: Light duty twin wheel swivel bracket with bolt hole

    A detailed description of the differences between bracket series is available in our guide.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Number of
    wheels

    		 Load capacity
    at 3 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LDA-VPA 50K-EL 50 18 2 60 ball bearing 71 60 x 60 38 x 38 / 48 x 48 6.2 31
    LMDA-VPA 50K-EL 50 18 2 60 ball bearing 71 41 10,2 31
    LDA-VPA 75K-EL 75 25 2 90 ball bearing 101 60 x 60 40 x 40 / 46 x 46 6.2 34
    LMDA-VPA 75K-EL 75 25 2 90 ball bearing 98 55 10,2 34
    To the product finder